31
EtherWAN Series Router Hardware Installation Guide
Appendix C - Mounting the Router
Option Two
1. Attached the two DIN Rail screws to the holding plate. The DIN Rail can be positioned either
with the snap on connector in the down or up position on the holding plate. See diagram below.
2. Slide the two screws into the holding plate, then attached that holding plate to the router. See
below.
3. Position the router such that the top hooks of the DIN rail clip attach onto the top of the
DIN rail.
4. Rotate the bottom of the towards the rail. This will snap the bottom hooks of the DIN rail
clip onto the bottom of the DIN rail.
