19
EtherWAN Series Router Hardware Installation Guide
Deployment Modes
Fixed Installation with Analog Input
•
Pin 1 (Power)—Use the Red wire in the DC cable to connect Pin 1 to the power
source. Include a 4.0 fast acting fuse in the input power line. continuous
(unswitched) DC power source is recommended.
•
Pin 2 (Ground)—Use the Black wire in the DC cable to connect Pin 2 to Ground.
•
Pin 3 (IGN — Ignition)—Connect to Power.
•
Pin (GPIO)— In this example, the GPIO (green) can by used as an analog input
and used to enter and exit standby.
For more information on configuring Standby Mode, Timed Standby Mode and Event
Handing see the Router User’s Guide.
