Etel DSC2P Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Etel DSC2P Скачать руководство пользователя страница 7

6

DSC2P Hardware Manual

ETEL Doc. - Hardware Manual # DSC2P / Ver H / 6/1/11

1.

Introduction

This document concerns a digital position controller of ETEL's DSCxx family:

the DSC2 position controller

or

DSC2P

also called 'controller' in this document.

The purpose of this manual is to give details regarding the specifications, installation, interfacing and hardware
items. All details for proper connections (power supply, motor, encoder connection, etc...) are provided herein.
Detailed information concerning the programming of the controller is provided in the corresponding

'Operation

& Software Manual'

.

The information given in this manual is valid for type # D S C 2 P x x x – x x x

A

and later.

Remark:

The updates between two successive versions are highlighted with a modification stroke in the
margin of the manual.

1.1

Safety

Please, read all the safety precautions listed in this manual before handling the
DSC2P:

•

Never use the DSC2P for purposes other than those described in this manual.

•

A competent and trained technician must install and operate the DSC2P, in accordance with all specific
regulations of the respective country concerning both safety and EMC aspects.

•

Troubleshooting and servicing are permitted only by ETEL's technicians and agreed distributors.

•

Operating the DSC2P will make the motor move.

Keep away from all moving parts to avoid

injuries!

•

The safety symbols placed on the DSC2P or written in the manuals must be respected.

•

If the DSC2P is integrated into a machine, the manufacturer of this machine must establish that it fulfils the
89/336/EEC directive on EMC before operating the controller.

Warning

:

Signals a danger of electrical shock to the operator.

Can be fatal for a person

.

Caution

: Signals a danger for the DSC2P. Can be destructive for the material.

A

danger

for the operator can result from this.

Caution

: Indicates electrostatic discharges (ESD), dangerous for the DSC2P.

The components must be handled in an ESD protected environment only.

Remark:

The DSC2P associated to its motor connector complies with the 89/336/EEC directive on EMC
and the 73/23/EEC low voltage directive.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
5
6
7
8
9
...
»

Содержание DSC2P













































Отзывы:

Нет отзывов