10
DSC2P Hardware Manual
ETEL Doc. - Hardware Manual # DSC2P / Ver H / 6/1/11
2.
Models characteristics
Three models of DSC2P are available, according to the needs:
1.
Rack format with plate heat sink
(refer to
§2.1
)
2.
Rack format with extruded heat sink
(refer to
§2.1
)
These 2 models are dedicated to be mounted inside a standard 6U rack case. They do not include any power
supply board and need to be powered through their DC power connector (JC15) by an external power supply
(the ETEL DSO-PWS power module, e.g.) ideally installed inside the rack case.
3.
Housed format with power supply
(refer to
§2.2
)
This controller is a 'stand alone' controller. It includes a complete controller with its power supply inside the
same housing. The main difference between the rack formats and the housed format concerns the power
supply connectors.
2.1
Rack format
There are two different sizes of DSC2P rack format: the DSC2Pxx
1
-xxx (10F wide) and the DSC2Pxx
2
-xxx
(14F wide).
2.1.1
Outline and dimensions
Refer to the following chapters for more details about the connectors:
JC1 (see
§3.3.1
)
JC4 (see
§3.3.4
)
JC7 (see
§3.4.2
)
JC10 (see
§3.1.3
)
JC2 (see
§3.3.2
)
JC5 (see
§3.1.1
)
JC8 (see
§3.6.1
)
JC15 (see
§3.5.1
)
JC3 (see
§3.3.3
)
JC6 (see
§3.1.2
)
JC9 (see
§3.2.1
)
164.00
261
.80
50.60
Standard 6U 10F
Unit: [mm]
261
.80
164.00
Standard 6U 14F
Unit: [mm]
70.80
Weight: 1.1 Kg
Weight: 2.0 Kg
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com