4 Ports ADSL2/2+ Router
113
7.
Testing LAN path to your 4 Ports ADSL2/2+ Router.
Ans.
To verify whether the LAN path from your PC to your 4 Ports ADSL2/2+ Router is
properly connected, you can
“Ping”
the 4 Ports ADSL2/2+ Router with the following procedures:
1. From the Windows toolbar, click
“Start”
and select
“Run”.
2. In the open field, type
“Ping 192.168.1.1”
and click
“OK”
3. If the path is working, you should see the message in the following format:
Reply from 192.168.1.1 bytes = 32 time < 10ms TTL = 60
4. If the path is not working, you should see the following message:
Request timed out
If the path is not functioning correctly:
1. Make sure the LAN port LED indicator is on.
2. Check whether you are using the correct LAN cable.
3. Check your Ethernet Adaptor installation and configurations.
4. Verify that the IP address for your 4 Ports ADSL2/2+ Router and your workstation are correct
and that the addresses are on the same subnet.
