manualshive.com logo in svg

Etec PTi-845, Руководство пользователя

Поделиться
Скачать
Etec PTi-845 Скачать руководство пользователя страница 112

 

4 Ports ADSL2/2+ Router

 

106

 

"Apply"

 button. The 

"Select All"

 select box can also be used to delete all the filter rule. It provides a 

quick method of selecting all filter rules for deletion. 

 

The 

"Enable Bridge Filters"

 button allow the user to enable or disable bridge filtering. It can be 

set/unset during any add/edit/delete operation. It can also be set/unset independently by just pressing 

the 

"Apply"

 button. 

 

Note: 

There are three hidden filter rules within the bridge filter table. These rules are entered 

automatically by the system to ensure the user does not

 "lock"

 themselves out of the system. The first 

rule allows any and all ARP frames through the system. The second rule allows all IPv4 frames with the 

destination MAC address of the bridge to go through. The third rule allows all IPv4 frames with the 

source MAC address of the bridge to go through. 

 

3. 

LAN Clients (Section 4.4.7 : ADVANCED - LAN Clients): 

Help section for LAN Clients. 

 

Using this feature user can see all the PCs on the LAN segment. Each PC is qualified to be either 

"dynamic" 

(PC obtained a lease from this router) or

 "static"

 (PC has a manually configured IP 

address). 

User can add a

 "static"

 IP address( belonging to the network segment of the router LAN IP address ). 

Any existing static entry falling within DHCP server's range can be deleted and the IP address would be 

made available for future allocation. 

 

Once an IP address is allocated it shows up in the list of LAN clients as a 

"dynamic"

 entry. Any 

dynamic entry can be converted into static by using

 "reserve"

 checkbox. 

 

Note:

 Dynamic clients show up in the list only when DHCP server is running. 

 

4. 

PPP Connection (Section 4.3.1.1 : CONFIG - WAN Setup – New Connection): 

Help for establishing 

a PPP Connection. 

 

Username:

 The username for the DSL access. 

 

Password: 

The password for the DSL access. 

 

Authentication:

 Specifies the authentication protocol required to establish connection. 

 

On-Demand:

 Enable on-demand mode. The connection will disconnect if no activity is detected after 

the specified idle timeout value. 

 

Idle Timeout:

 Specifies that DSL should disconnect if the link has no activity detected for n seconds. A 

non-zero value. 

 

Содержание PTi-845



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды