ETC Releve Spot, Руководство по установке

Страница: 7 / 8

ETC Installation Guide
Relevé Spot
Relevé Spot Page 7 of 8 ETC
DMX Channel Mode
Relevé Spot has two modes of operation, which are accessible in the Control Settings menu from
the user interface. A full listing of control channels and timing data for the selected mode of
operation is available on the ETC website
etcconnect.com/ReleveSpot/DMX-Channel-Map .
•
Standard Mode utilizes 20 channels of control. This is the default setting.
•
Direct Mode utilizes 25 channels of control.
Note:
The color output of all Relevé Spot luminaires is calibrated at the factory.
When operating in Standard Mode, each luminaire makes accommodations for the specific
LEDs in its array and produces output that is consistent with other luminaires, whether or
not they utilize LEDs from the same production batch.
Operating in Direct Mode bypasses this calibration, and multiple luminaires may produce
slightly different outputs when controlled as a group.
Standard Mode Direct Mode
Channel Parameter Channel Parameter Channel Parameter
1 Intensity 1 Intensity 21 Configuration
2 Red 2 Red 22 Pan/Tilt Speed
3 Green 3 Green 23 Zoom/Focus Speed
4 Blue 4 Blue 24 Reserved
5 Strobe 5 Lime 25 Beam Speed
6 Pan Coarse 6 Strobe
7 Pan Fine 7 Pan Coarse
8 Tilt Coarse 8 Pan Fine
9 Tilt Fine 9 Tilt Coarse
10 Gobo Mode 10 Tilt Fine
11 16-bit Gobo Index Coarse 11 Gobo Mode
12 16-bit Gobo Index Fine 12 16-bit Gobo Index Coarse
13 Ani-gobo Mode 13 16-bit Gobo Index Fine
14 Ani-gobo Index 14 Ani-gobo Mode
15 Focus Coarse 15 Ani-gobo Index
16 Focus Fine 16 Focus Coarse
17 Zoom 17 Focus Fine
18 Iris 18 Zoom
19 Frost 19 Iris
20 Configuration 20 Frost