ETC Installation Guide
Relevé Spot
Relevé Spot
Page 3 of 8
ETC
For installation convenience, four hanging points are provided on the enclosure, two each in planes
90 degrees from each other.
10 in
25.4 cm
1
A
B
5 in
12.7 cm
Item#
Name
Part Number Notes
1
Clamp Mounting Rails 2510A2017
Securely install on the provided attachment
points on the base of the enclosure.
Two clamp mounting rails are provided with the luminaire for attachment to
truss clamps (not provided, see
Truss Mounting Clamps on the next page
) or
other compatible hardware for installation.
The clamp mounting rails feature a safe-latching system for secure fit to the
hanging points on the enclosure.
1. Install the truss clamps (not provided) to the clamp mounting rails.
2a
2b
2c
2. Attach the clamp mounting rails to the enclosure.
a. Align the keyed holes of the clamp mounting rail to the attachment points on the
enclosure.
b. Each clamp mounting rail should be installed on the same plane and facing the same
direction.
c. Slide the clamp mounting rail in place until the locking mechanism is seated and captures
the attachment point. The mounting rail will be locked in place and flush to the enclosure
when installed properly.
