ETC Installation Guide
Relevé Spot
Relevé Spot
Page 4 of 8
ETC
Truss Mounting Clamps
Truss mounting clamps are available from ETC, sold separately.
Part Number Description
PSF1131
Mega-Coupler™ Clamp 1.9" Pipe/2.0" Truss, Black
PSF1132
Mega-Coupler Clamp 1.9" Pipe/2.0" Truss, White
PSF1133
Mega-Claw™ Clamp 1.9" Pipe/2.0" Truss, Black
PSF1134
Mega-Claw Clamp 1.9" Pipe/2.0" Truss, White
PSF1135
Trigger Clamp™ 1.9" Pipe/2.0" Truss Tube, Black
PSF1136
Trigger Clamp 1.9" Pipe/2.0" Truss Tube, White
Spacing Requirements
For full pan and tilt operation, install the Relevé Spot with a minimum of 27.0 in (68.6 cm) between
centers. The luminaire features Whisper Home technology, which provides instant pan and tilt
homing at power on with minimal movement. You can install the luminaires closer together if you
restrict the pan and/or tilt movement using the features provided for pan and tilt in the Options
menu.
Note:
Add additional spacing between luminaires when using accessories such as a top
hat. Refer to the accessory datasheet for dimensions.
Rigging
WARNING:
RISK OF INJURY! Check each clamp mounting rail and truss clamp
for proper and secure installation before hanging the luminaire.
AVERTISSEMENT :
DANGER DE BLESSURE ! Avant d’accrocher le luminaire,
vérifiez chaque crochet et chaque porteuse pour une installation correcte et en
sécurité.
Relevé Spot can be yoked in any mounting position using the provided hanging points. The luminaire
can also be installed on the floor or a suitable level, horizontal, and flat surface. Rubber feet are
provided on the base of the enclosure.
