ETC Installation Guide
Relevé Spot
Corporate Headquarters Middleton, WI, USA +1 608 831 4116 London, UK +44 (0)20 8896 1000
Holzkirchen, DE +49 (80 24) 47 00-0 Rome, IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 Paris, FR +33 1 4243 3535
Web
Support
Contact
© 2020 ETC, Inc. Trademark and patent info:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
2510M2100 Rev C Released 2020-10
Introduction
Congratulations on your purchase of the Relevé Spot automated
luminaire from ETC.
Relevé Spot is an LED-based automated luminaire that provides high-
quality color control, predictable smooth pan and tilt control, and
unparalleled zoom optics.
Relevé Spot builds on the legendary color control of ETC LED products
and provides a reliable, full-featured automated luminaire of the highest
quality.
Safety Notices
Relevé Spot is a high-performance automated spot luminaire that is
intended
for professional use only
. Read the entire user manual before
installing and operating this equipment. The user manual is available as
a download from the ETC website
READ AND FOLLOW THESE SAFETY WARNINGS BEFORE USE:
•
For indoor use only. The luminaire is IP20 rated for installation in dry locations only. When
selecting the installation location, ensure the luminaire will not be exposed to extreme cold or
heat outside of the operational range (see
), moisture, or dust.
•
Do not project the light beam onto combustible surfaces or materials. The minimum distance
you should maintain from the luminaire head to an illuminated surface is 2 m, and the minimum
distance from the luminaire head to any flammable materials (decorations, etc.) is 0.1 m.
•
Disconnect the luminaire from power and DMX and allow it to cool before performing any
cleaning and maintenance procedures.
Warranty Service
ETC warranty terms and conditions are available on the ETC website
Installation
Unpacking Instructions
The luminaire is fully calibrated and tested at ETC, then carefully packaged in a shipping carton that
includes the luminaire and two clamp mounting rails.
Visually inspect the shipping carton for damage that may have occurred during transit. If the shipping
carton shows signs of damage, document the damage fully before unpacking the luminaire.
Documentation of any damage is helpful when reporting a claim with the carrier.
The luminaire weighs approximately 67 lbs. (30.4 kg). For your safety, ETC recommends that two
people unpack the luminaire from the shipping carton. Use the provided handles on the yoke arms
and the enclosure to lift the luminaire from the shipping carton.
The shipping carton and packaging materials can be valuable if you ever need to ship the fixture,
including transporting the fixture for service. Do not discard. If you do not require this packaging for
future use, please recycle the materials through your local recycling program.
