ETC Irideon AR250, Инструкция по эксплуатации

Страница: 5 / 30

Many of the operations described later in this manual can only be performed with the projector housing opened.
To access the internals of the projector, proceed as follows:
1) Using a Philips head screwdriver, loosen and remove the 11 screws (A) which affix the rear housing (B) of the projector body.
2) Remove the cover (B) from the central seal.
3)You should now have access to the internals of the unit and may carry out the instructions detailed below.
Attention!
Turn off the power prior to opening up the unit.
The fixture’s internal temperature may reach 250°C (482ºF) after 5 minutes, with a maximum peak of 350°C (662ºF).Ensure the
lamp is cold prior to attempting removal. The fixture should be allowed to stand and cool for 10 minutes prior to its removal.
4. Opening the projector
English
6