6) Insert the lamp into the lampholder (
E
).
The lamp used is manufactured from quartz glass and should be handled with care. Always adhere to the instructions supplied in
the lamp’s packaging. Do not touch the glass directly, use the cloth provided with the lamp.The GY 9,5 lampholder is asymme-
trical in construction, with one pin larger than the other. Ensure that the pins are correctly aligned with the appropriate socket.
DO NOT USE UNDUE FORCE. Incase of difficulty, re-read the instructions and repeat the procedure.
7) Replace the lamp assembly into its original position and replace
and retighten the screws
Do not close the unit until all the operations have been performed on the display panel internal to the
AR 250
.
The fixture may operate at voltages ranging from 100, 115, 208, 230 or 240V .at 50 or 60 Hz. Factory preset voltage is indicated
on the sticker located on the base of the projector, as indicated in the following diagram.
If the specified voltage and frequency do not match those of the country in which you are operating, follow the instructions in sec-
tion
18
of this manual.
“Altering the operating voltage and frequency”
Incorrect voltage and frequency selection will detrimentally affect the operation of the projector.
factory set
main at:
100V
115V
208V
230V
240V
50Hz
60Hz
6. Operating voltage and frequency
English
8
Содержание Irideon AR250
Страница 1: ...instructions manual ...
