ETC F-Drive W1 Series, Руководство по установке, Страница: 35 / 44

Chapter 4 31
Parameter RDM PID Value Notes
Red Shift 0x8106 0, 1
Sets if red shift is enabled on a Chroma Card
0 = disabled
1 = enabled
Red Shift Description 0x8114 "disabled" or "enabled"
"Get" returns an ASCII text string.
Color Fixture White Point 0x8107
•
0 is 2700K
•
1 is 3000K
•
2 is 3500K
•
3 is 4000K
•
4 is 5000K
"Set" shifts the white point of the W1 Chroma
Driver. The default is 3000 K. This feature is only
available in IRGB mode (see DMX Personality on
page 29 ).
Color Fixture White Point
Description 0x8108 See Color Fixture White Point
above.
"Get" returns an ASCII text string.
Get Slot Info 0x0120 W1 Chroma Driver in Direct personality: Intensity, Red, Green, Blue, White
W1 Chroma Driver in RGBW personality: Intensity, Red, Green, Blue
All other models: Intensity
See DMX System Control on page 27 .
Get Slot Description 0x0122
Default Slot Value 0x0122
Factory Defaults 0x0090
Set resets the configurations of the control card and
all output cards to defaults.
Software Version Label 0x00C0
Get returns current software version as an ASCII text
string.
On Below Minimum
"On Below Minimum" is a sub-feature of the RDM "Minimum Level" parameter (see Minimum
Level on
page 30
). When "On Below Minimum" is set to "true," the channel's minimum level
will hold until the DMX level is 0. Any non-zero input level below the set minimum level will
cause fixtures connected to the channel to output at the set minimum level. When "On Below
Minimum" is set to "false," the fixtures connected to the channel turn off when the DMX level
is below the minimum level.
On Below
Minimum Setting
ON
OFF
Control Input Level
O
u
tput L
ev
e
l
Minimum Level
0
0
1
See RDM E1.37-1 2012 for full details.