42
CEM3 User Manual
Chapter 4
Web Access and Mobile App
This chapter describes the CEM3 web interface and the Sensor3 ThruPower System Reporter.
Using the CEM3 Web Interface
CEM3 features a basic web interface accessible over the system network using any internet browser
that allows you to view the system status, perform some basic functions, update software, and upload
or download the rack configuration.
To access the CEM3 over the network:
1:
Connect an internet browsing device (such
as a computer or mobile device) to the
system network. You can connect using the
network connector on the face of the CEM3.
2:
Set the connected device to the proper
IP address range if using a system of fixed
IP addresses. If your system uses dynamically
assigned addresses (DHCP), your address will
be assigned from the system server.
3:
Open an internet browser on the connected
device.
4:
In the browser address bar, enter the
IP address of the CEM3 you wish to view.
The address can be found by navigating to
[Setup]>Network and noting the digits in
the IP: field.The CEM3 System page will
appear in the browser.
The home page menu provides access to the five
available pages of the interface: System, Dimmers,
Set Levels, Setup, Presets, and Files.
System
This page displays the software and power information for the rack, as well as any currently active error
messages.
Dimmers
This page allows you to view the current status of all circuits in the rack.
Web Interface System Page
Содержание CEM3
Страница 1: ...Part Number 7140M1200 1 7 0 Rev C Released 2019 04 Sensor3 CEM3 User Manual Version 1 7 0...
Страница 82: ...76 CEM3 User Manual...
Страница 83: ...PhaseAdept Dimmer 77...