30
CEM3 User Manual
Saving or Uploading Files and Firmware
CEM3 allows you to save configurations to USB removable media, a computer connected to the
network (using the CEM3 web interface), or an FTP server on the network. Before you can use an FTP
server, you must configure it on the CEM module. See
Working with Net3 Conductor Over FTP
You can also upload a configuration or update the CEM3 software using the same methods.
Saving Configurations
To USB Media
1:
Navigate to [Setup]>File Operations>Save to USB
.
The Save As screen will appear.
2:
If desired, edit the name of the configuration using the scroll wheel and keypad.
a: Select the file name using the scroll wheel and press [Enter]. The first character of the rack
name will be highlighted.
b: Use the keypad to alter the selected character. Keypad numbers have standard keypad text
input letters. Multiple presses of any key will cycle through the number, lowercase letters, and
then uppercase letters for that key.
c: When the desired character is displayed, use the scroll wheel to move to the next character
in the rack name. If you want the name to be longer, press [Next] to add another character.
d: Repeat steps b–c until the desired rack name is displayed.
e: When the rack name is correct, press [Enter].
3:
Select OK and press [Enter]. The configuration will be saved to the device.
To a Computer
To save a configuration to a computer on the system network, see
To an FTP Server
Navigate to [Setup]>File Operations>Save to Server. You can edit the file name prior to saving using
the scroll wheel and the keypad to enter letters.
Loading Configurations
From USB Media
1:
Navigate to [Setup]>File Operations>Load from USB
.
The Load File screen will appear.
2:
Use the scroll wheel to navigate the file structure to the desired configuration file (the file name
will end in “.etc”) and press [Enter]. The configuration will load.
From a Computer
To load a configuration from a computer on the system network, see
From an FTP Server
Navigate to [Setup]>File Operations>Load from Server
and choose the desired file from the list that
appears (CEM3 configuration file names end in “.etc”).
Содержание CEM3
Страница 1: ...Part Number 7140M1200 1 7 0 Rev C Released 2019 04 Sensor3 CEM3 User Manual Version 1 7 0...
Страница 82: ...76 CEM3 User Manual...
Страница 83: ...PhaseAdept Dimmer 77...