ETC ArcSystem Pro D1 HO, Руководство по установке

Страница: 22 / 25

ETC Installation Guide
D1 & D2 Series Drivers
D1 & D2 Series Drivers Page 22 of 25 ETC
Parameter RDM PID Value Notes
DMX Start Address 0x00F0 Range = 001 to 512 Default is 001.
DMX Personality 0x00E0 1 or 2
Default is 2.This parameter doesn't affect D1 and
D2 Series Drivers.
Identify Device 0x1000
0 for stop identify, 1 for start
identify Set to 1 causes output(s) and LEDs of the unit to
blink in a one second on, one second off pattern.
Minimum Level 0x0341
Minimum Level - Increasing: 0
to 255
Minimum Level - Decreasing: 0
to 255
Default is 99%. The luminaire will not accept a
Minimum Level that is higher than the Maximum
Level.
Minimum Level - Increasing and Minimum Level -
Decreasing need to be set to the same value.
Maximum Level 0x0342 0 to 255
Default is 100%. The luminaire will not accept a
Maximum Level that is lower than the Minimum
Level.
Curve 0x0343 1, 2, or 3
•
Set to 1 is the Default Tungsten Curve (aka
D04A)
•
Set to 2 is Linear
•
Set to 3 is Square Law
Curve Description 0x0344 Get returns an ASCII text string.
Output Response Time 0x0345
•
0x01 1000 ms/100 steps
•
0x02 900 ms/90 steps
•
0x03 800 ms/80 steps
•
0x04 700 ms/70 steps
•
0x05 600 ms/60 steps
•
0x06 500 ms/50 steps
•
0x07 400 ms/40 steps
•
0x08 300 ms/30 steps
•
0x09 250 ms/25 steps
•
0x0A 200 ms/20 steps
•
0x0B 100 ms/10 steps
•
0x0C 50 ms/5 steps
•
0x0D 0 ms/0 steps
Default is 500ms/50 steps. This parameter controls
dimming up in level.
Output Response Time
Down 0x8030 Default is 500 ms/50 steps. This parameter controls
dimming down in level. Set 0x00 to set the Output
Response Time Down to the same setting as Output
Response Time.
Output Response Time
Description 0x0346 Get returns an ASCII text string.
Modulation Frequency 0x0347
•
1 for 300 Hz
•
2 for 600 Hz
•
3 for 1.2 kHz
•
4 for 19.2 kHz
Default is 300 Hz.
Modulation Frequency
Description 0x0348 Get returns an ASCII text string.
Restore Factory Defaults 0x0090 Set resets the luminaire configuration to default
settings.
Software Version Label 0x00C0 Get returns the current software version as an
ASCII text string.
Bootloader Version Label 0x00C2 Get returns the current bootloader version as an
ASCII text string.