Etatron eSelect M 1 CI, Инструкция по эксплуатации и техническому обслуживанию

Страница: 22 / 30

22 ENGLISH
FUNCTION NOT AVAILABLE SIMULTANEOUSLY WITH PROPORTIONAL MODE
The Delay time
blocks the output relays (max 999 sec. programmable) to ensure the outputs are active only
when the measurements are stable, thus assuring the best results in terms of chemical balance.
* GOING BACK TO THE SETPOINT PROGRAMMING STEPS FROM THE
“ON
-
OFF”
MODE OR
“PROPORTIONAL” MODE
FUNCTION ONLY VALID FOR SET POINT1 TO CHANGE THE PREVIOUSLY SELECTED CHLORINE RANGE
-
Ion-selective membrane sensor range 0-2 Cl ppm ( default ); range 0-20 Cl ppm; range 0-20 Cl ppm (Total);
-
Open type amperometric cell ( CLC model) range 0-10 Cl ppm
Once the selection is made, the display and measurement resolutions change accordingly.
In the event of changing the range, ensure the appropriate sensor is used!
FUNCTION ONLY AVAILABLE WITH SETPOINT 1
The MIN and MAX Alarm function selects the alarm levels beyond which the alarm relay is triggered on.
With the overdose time alarm one can select a period during which the setpoint must be reached. If the setpoint
is not reached during this period of time, the instrument blocks output operations, including those in mA
(metering pumps), the alarm is displayed as ON and triggers a signalling instrument connected to the alarm
relay.
Maximum Metering is an extra safety function that ensures metering is
completed in the selected time. This function makes it possible to eliminate
time limits (continuous metering according to the selected setpoints) or to
select the minutes (up to 999) and the hours, for instance metering for 999
minutes in 24 hours.
The start-up delay stops the output relays when the unit is switched on, thus allowing the sensor to polarise
assuring correct measurements (programmable). ONLY SETPOINT1 EXPERT MENU
MENU SETPOINT 1 -2
Hysteresis
0.005 Cl p p m

EXPERT MENU

MENU SETPOINT 1 -2
Hysteresis
0.05 Cl p p m

EXPERT MENU

MENU SETPOINT 1 -2
Hysteresis
0.05 Cl p p m
( T ot )

EXPERT MENU

MENU SETPOINT 1 -2
Hysteresis
CLC 0.05 C l p p m

EXPERT MENU

MENU SETPOINT 1-2
Set point del.
5 s ec

EXPERT MENU

MENU SETPOINT 1
Chlorine Scale
0-2 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Chlorine Scale
0-20 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Chlorine Scale
0-20 Cl p p m
( T ot )

EXPERT MENU

MENU SETPOINT 1
Chlorine Scale
CLC 0-10 C l p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MIN
0.000 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MIN
0.00 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MIN
0.00 Cl p p m
* ( T ot )

EXPERT MENU

MENU SETPOINT 1
Alarm MIN
CLC 0.00 C l p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MAX
2,000 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MAX
20.00 Cl p p m

EXPERT MENU

MENU SETPOINT 1
Alarm MAX
20.00 Cl p p m
* ( T ot )

EXPERT MENU

MENU SETPOINT 1
Alarm MAX
CLC 10.00 Cl p p m

EXPERT MENU

MENU SETPOINT 1-2
Overdose
00.00 h:m

EXPERT MENU

MENU SETPOINT 1-2
Max. Metering
000 (no limi t)

EXPERT MENU

MENU SETPOINT 1-2
Max. Metering
000 m / 00 h

EXPERT MENU

MENU SETPOINT 1
Start-up Delay
00.00 h:m

EXPERT MENU
