ETAS ES5338.1, Руководство пользователя

Страница: 15 / 44

ES5338.1 Carrier Board for Wheel Speed Sensor Simulation - User’s Guide 15
ETAS Introduction
1.6 About this Manual
This manual consists of the following chapters:
• "Introduction" on page 5
This chapter
• "Design, Installation and Fuses" on page 17
This chapter contains information about the setup and installation of the
ES5338.1 Carrier Board and the PB5338CURR.1-A Piggyback. It also con-
tains information about the fuses.
• "Simulated Sensor Signals" on page 27
This chapter describes the sensor signals that can be generated with the
ES5338.1 Carrier Board.
• "Connections and Plug Connections" on page 33
This section provides a description of the different connections of the
ES5338.1 Carrier Board.
• "Technical Data and Standards" on page 37
This chapter contains the technical data of the ES5338.1 Carrier Board for
Current Output Piggyback PB5338CURR.1-A. It also contains standards
met.
1.6.1 Working with this Manual
Presentation of Information
All activities to be performed by the user are presented in a "Use Case" format.
That is, the goal to be accomplished is briefly defined in the heading, and the
respective steps required for reaching this goal are then presented in a list. The
presentation looks as follows:
Target definition
Any advance information...
1. Step 1
Any explanation for step 1...
2. Step 2
Any explanation for step 2...
Any concluding comments...
Specific example:
Creating a new file
Before creating a new file, no other file may be open.
1. Select File → New .
The "Create File" dialog box appears.
2. Enter the name of the new file in the “File name”
field.
The file name may not have more than 8 characters.
3. Click on OK .