Page 34 of 45
User manual
Transporting
your chair
6.2. Using a clamp down unit (optional extra)
DANGER
The clamp down unit must be fitted by an approved installer and
adjusted to suit the wheelchair in accordance with the description of
fitting.
NOTE
If you fail to get out of the clamp down unit, a flashing red light will be
displayed for 90 seconds after five attempts and the clamp down unit will
remain inactive for this period in order to prevent the release solenoid
overheating. The clamp down unit will be ready for use again after 90 seconds.
NOTE
There is a manual release. This is located on the back of the chair and is a
gilted switch.
MAKE SURE THAT ARMRESTS, WHEELS AND
OTHER COMPONENTS DO NOT PREVENT
BODY CONTACT. THERE MUST BE FULL BODY
CONTACT WITH THE 3-POINT STRAP.
MAKE SURE YOU ALWAYS USE THE
ORIGINAL FIXING EQUIPMENT, IN
ADDITION TO THE EQUIPMENT THAT HAS
BEEN MOUNTED ON THE CHAIR.
