Adapting
your wheelchair
User manual
Page 21 of 45
4.2.5. Adjusting the width between the foot supports
Manual footrest:
1.
Loosen the attaching screw (1).
2.
Move the foot supports sideways.
3.
Tighten the attaching screw (1).
4.
Repeat the same procedure for
the other foot support.
4.2.6. Removing and pivoting out the foot supports
NOTE
Applicable to manual foot supports.
•
The foot support can be pivoted out by lifting it up from the attaching
bracket and pivoting it out.
•
The foot support can be lifted off by lifting it up and off the attaching
bracket.
4.3. Adjusting the joystick
For optimum comfort, it is important for the joystick to be positioned correctly
in relation to the arm of the user.
Balder Finesse, Liberty and Junior:
1.
Undo the screws (1 and 2).
2.
Adjust the location of the bracket
according to how far forward you
want the joystick to sit on the
armrest.
3.
Tighten the screws (1 and 2).
