eta SH Touch, Руководство по эксплуатации

Страница: 47 / 64

47
2012-11
Buffer Buffer with solar
SH Operation
Buffer with solar
Different overviews depending
on configuration
The way the buffer and the temperatures are
displayed on the screen differs depending on the
configuration of the heating system.
Buffer with a solar heating system
If the current
solar panel
temperature is
5°C
(factory setting) higher than the Buffer bottom
solar
temperature, the solar heating system begins
to charge the buffer. The icon for solar charging
appears together with the current solar
panel temperature.
If the
solar panel temperature falls below the
Buffer bottom solar temperature, the solar coll-
ector pump is switched off .
Buffer top
Buffer bottom Buffer bottom solar
Solar panel temperature
Solar panel is charging buffer
Buffer with solar heating system and stratified
charging valve
The stratified charging valve toggles solar
charging between the top and bottom sections
of the buffer
. With this function, the temperatures
"Buffer top solar" and "Buffer bottom solar" are
continually compared with the current solar panel
temperature.
First the
top is always charged as soon as the solar
panel temperature is higher
than the
Buffer top
solar temperature.
After reaching the
Buffer target
temperature,
charging switches to Bottom until the Buffer
target temperature has also been exceeded at the
bottom
.
The icon for solar charging is shown at the
top or in the middle of the buffer, depending on
the position of the stratified charging valve.
Buffer top
Buffer bottom Buffer bottom solar
Solar panel Buffer top solar
Solar panel is charging top section of buffer.
The stratified charging valve is in the top
position .
Icon in the middle: buffer is being charged in
bottom
section. The
stratified charging valve
is in
the bottom position.