eta NERO 5180, Руководство пользователя

Страница: 38 / 76

7) Automatic shut-off, mode settings
The coffee machine has 3 mode settings with the following properties:
ECO mode Fast mode Default mode
Active light for the coffee spout
A11
no yes yes
Pre-brew * yes no yes
Auto shut-off in 10 min. 30 min. 20 min.
Storing the water quantity
settings
yes yes yes
* The pre-brew feature means that the freshly ground coffee is pre-brewed for several
seconds with a small quantity of water. The coffee will swell up which will help release its
aroma and other substances contained in it. However, it will take a little bit longer to brew
the coffee.
A) In the stand-by mode, press the switch A1 for 5 seconds.
B) The buttons pertaining to the individual functions will start flashing, while one of them will
be on steadily. The button which is steadily on is currently set and the given mode has
been activated (see the Table below).
Button B4
Button B1 Button B2
In the ECO mode ON flashing flashing
In the Fast mode flashing ON flashing
In the default mode flashing flashing ON
C) To change the mode, press the relevant button (see the Table).
The change is confirmed by a double signal sound.
D) If you do not wish to change the settings, press the switch A1 again or wait for 5 seconds.
When all the components are in place, the power cable is connected,
there is clean water in the tank and coffee beans in the coffee container and the water
piping system has been flushed out, the coffee machine is ready for use.
GB
38 / 71