3
METERING PUMP IS INTENDED FOR CHEMICAL DOSING.
Do not use in explosive area (EX).
Do not use with flammable chemicals.
Do not use with radioactive chemicals.
Use after a proper installation.
Use the pump in accordance with the data and specifications printed on the label.
Do not modify or use in a manner inconsistent with the provisions of the operating manual.
Keep the pump protected from sun and water. Avoid water splashes.
In emergencies the pump should be switched off immediately. Disconnect the power
cable from the power supply.
When using pump with aggressive chemicals observe the regulations concerning the
transport and storage of aggressive fluids.
When installing always observe national regulations.
Manufacturer is not liable for any unauthorized use or misuse of this product that may
cause injury, damage to persons or materials.
Pump must be accessible at all times for both operating and servicing. Access must
not be obstructed in any way.
Feeder should be interlocked with a no-flow protection device.
Pump and accessories must be serviced and repaired by qualified and authorized
personnel only.
Before any operation:
•
always read chemical Material Safety Data Sheet (MSDS);
•
always wear protective clothing;
•
always discharge the liquid end before servicing the pump.
•
empty and rinse the liquid end before work on a pump which has been used with
hazardous or unknown chemicals.
•
This equipment requires regular maintenance to ensure potability requirements of the
water and maintenance of improvements as declared by the manufaturer.
PURPOSE OF USE
AND SAFETY
Feeder should be interlocked with a no-flow protection device to automatically
shut-off the pumps when there is no flow!
Adequate measures shall be taken to prevent cross connection of chemicals!
Chemical feeding must be stopped during backwash cycles and periods of noflow as
these conditions may introduce the potential for chemical overdosing. Not doing so
may result in elevated chemical concentrations and hazerdous gas introduction into
the pool or spa.
Содержание K AC PLUS 1018
