– When taking the plug from the electric socket, never pull the power cord or the vacuum
cleaner. When winding the cord, hold the plug to prevent lashing of the cord around and
to prevent possible injury. If you need to use an extension cord, it has to be uncorrupted
and it has to comply with the valid standards.
– If the battery is leaking, remove it immediately; it can damage the vacuum cleaner.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Never use the appliance for any other purpose than for the intended one described in
these instructions for use! This appliance is not intended for outdoor use.
–
All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The manufacturer is not responsible for damage caused by improper use of the
appliance and the accessories and its warranty for the appliance does not apply in
situations when the safety warnings above are not complied with. Failure to replace or
maintain all filters regularly according to the instructions in Chapter
IV.
,
V.
and also using
non-original filters, the properties of which resulted in failure or damage of the vacuum
cleaner, is also understood to be improper use of the appliance.
For trouble–free operation of the vacuum cleaner, please use
the tested dust filters and micro–filters recommended by the
producer.
II. EQUIPMENT AND ACCESSORIES OF ETA – x489 (Fig. 1).
A – vacuum cleaner
A1 – suction vent
A9 – handle
A2 – lid
A10 – power cord
A3 – lid lock
A11 – parking holes
A4 – START/STOP button
A12 – exhaust grid
A5 – power cord winding button
A13 – exhaust HEPA micro–filter
A6 – electric motor regulation
A14 – filter (adapter) holder
A7 – full filter signaling / performance indicators
A15 – dust filter
A8 – cover (grid)
A16 – suction micro–filter
B – adapter for UniBag
B1 – filter head blocking lock
C – accessories
C1 – floor nozzle
C6 – crevice nozzle
C2 – suction hose
C7 – TURBO nozzle
C3 – suction tube
C8 – rotary parquet nozzle (ETA7489 and 3489/10
)
C4 – upholstery nozzle
C9 – parquet nozzle (ETA3489/20)
C5 – brush
D – Accessories Premium Clean
E – Remote control on handle – ONLY ETA7489
GB
25 / 48
24