III. VACUUM CLEANER PREPARATION
Hose
– Connect hose
C2
to the vacuum cleaner by inserting the end piece to suction vent
A1
to
the maximum position (Fig. 4). You will hear a clicking sound.
– Disconnect the hose by pressing the button on the end piece and remove the hose by pulling it
slightly.
Telescopic tube
– You can connect tube
C3
with hose handle
C2
by slight pushing the handle to the tube (Fig. 3).
– You can disconnect the tube by pulling the handle slightly out of the tube.
– The telescopic tube allows setting suitable length to fit your figure. Press the lock pin in the
direction of the arrow and pull out or push in the required length of the tube (Fig. 5). When
you release the lock projection, the tube length is fixed. When pulling out, keep the tube in
safe distance from your face as the tube is very long.
Remote control E / hose handle (fig. 22)
–
Connect the hose
C2
to the remote control by inserting its terminal into its back part under
the handle all the way. You will hear an audible “click”. To disconnect the hose, press both
arrest buttons and slide it out of the remote control.
–
You can connect the tube
C3
with the remote control by inserting it lightly into the front part
of the remote control. The arrest protrusion of the tube must fit into the prepared slit in the
mouth of the remote control. You will hear an audible “click”.
–
To disconnect the tube, press the tube arrest button and pull it out lightly from the remote
control.
Floor nozzle / TURBO nozzle / (rotary) parquet nozzle
– Connect and disconnect the accessories (
C1
,
C7, C8, C9
) in the same way as the tube (Fig. 2).
Floor / crevice nozzle / brush / Accessories Premium Clean
– Connect and disconnect the accessories (
C4
,
C5
,
C6, D
) in the same way as the tube (Fig. 3).
You can connect the appliance directly to the hose handle or to the telescopic tube.
IV. USE OF VACUUM CLEANER
Remove all packing material, take out the vacuum cleaner and the accessories. Pull out
necessary length of power cord
A10
and plug the power cord into a socket. Assemble the
vacuum cleaner accessories
C1
,
C2
,
C3
(Fig. 2, 3, 4). If the cleaner is fitted with telescopic
tube
C3
, adjust its length to fit your figure (Fig. 5). Floor nozzle
C1
is designed to be used to
clean carpets or smooth flooring (Fig. 6). If the floor nozzle is fitted with a brush, pull it out
by switching over a flap when vacuuming hard floorings. You can use crevice nozzle
C6
for
vacuuming places that are hard to access (Fig. 8). Upholstery nozzle
C4
or brush
C5
can
be used to clean various types of furniture (Fig. 7, 9). The parquet nozzle is intended for
cleaning smooth floors. With the Premium Clean small accessory
D
, you can vacuum various
and hard-to-access places, such as keyboards, walls, corners, radiators etc. The vacuum
cleaner can be switched on or off by pushing button
A4
marked with the symbol (Fig.
10). The suction power can be adjusted with the control on hose handle
C2
(Fig. 11) or by
setting regulation
A6
(Fig 10)
or
E
(Fig. 22). The minimum suction power is recommended
for fine fabrics (e.g. curtains, drapes). The maximum suction power is recommended for floor
coverings (e.g. heavy–duty carpets).
27
GB
26 / 48
