eta BE-P3, Руководство по установке

Страница: 17 / 20

Concluding activities meinETA remote control
17
4.2.3 Software version X.36.0 and later
Update software
A software update must always be carried out
separately and in succession on the ETAtouch
control panel of the boiler itself and on all further
ETAtouch control panels.
1. Plug the USB-memory stick (with the files for the
software update) into the ETAtouch control panel.
2. On the ETAtouch control panel, increase the au-
thorization level to [Service]. For this, open the
system settings
and tap the [Authorisation]
symbol. A settings window appears. Enter the
password "135" and press [Accept the authorisa-
tion] to confirm.
3. The software update menu opens by pressing the
[Software update] button. If an update is
available, it will appear on the screen.
Fig. 4-1: Software update menu
If the USB-memory stick is not detected,
remove it, plug it in again and press the
[Reload] button.
4. To install, press the symbol during the update.
A safety notice appears to confirm this.
The software update is then installed.
5. After installation, a request appears to remove the
USB -memory stick.
After removing the USB memory stick, the
ETAtouch control panel will restart automatically.
The software update was successfully installed and
completed when the
symbol is displayed at the
bottom of the screen.
Install the software update on all further
ETAtouch control panels in the same way.
4.3 meinETA remote control
register on "meinETA"
If a "meinETA" account already exists, register the new
control panel with the same access information.
4.3.1 Up to software version X.35.X
Registering the ETAtouch controller
1. On the ETAtouch control panel, press .
2. Press the [meinETA access] button.
3. Press [Register].
4. Enter the user name and the password from the
meinETA access data.
5. Enter the boiler number.
6. Press [Register].
The data are transferred to ETA and the ETAtouch
controller is registered for this user.
4.3.2 Software version X.36.0 and later
Registering the ETAtouch controller
1. On the local ETAtouch control panel, press
the button.
2. Press the [meinETA access] button.
3. Enter the access data [User
name], [Password] and [Type plate]:
a) Press the button.
An on-screen keyboard appears for input.
4. Press the [Register now] button.
The data is transferred to ETA and the ETAtouch
control system is registered.