eta 339390001, Инструкция по эксплуатации

Страница: 93 / 148

EN - 93
EN
PROTECT AGAINST FREEZING
please take frost protection measures on the dishwasher in winter.
Every time after washing cycles, please operate as follows:
1) Cut off the electrical powerto the dishwasher.
2) Turn off the water supply and disconnect the water inlet pipe from the water valve.
3) Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4) Reconnect the water inlet pipe to the water valve.
5) Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.
NOTE
If your dishwasher cannot work because ofthe ice, please contact professional service persons.
CLEANING THE SPRAY ARMS
-
It is necessary to clean the spray arms regularly for hard water
chemicals will clog the spray arm jets and bearings.
-
To remove the upper spray arm, hold the nut, rotate the arm clockwise
to remove it.
-
To remove the lower spray arm, pull out the spray arm upward.
-
Wash thearmsinsoapy and warm water and use a soft brush to clean
thejets. Replace them after rinsingthem thoroughly.
HOW TO KEEP YOUR DISHWASHER IN SHAPE
• After Every Wash
After every wash, turn off the water supply
to the appliance and leavethe door slightly
open sothat moisture and odours are not -
trapped inside.
• Remove the Plug
Before cleaning or performing maintenance,
always remove the plug from the socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products. Only use a cloth with
warm soapy water. To remove spots orstains
from the surface of the interior, use a cloth
dampened with water and a little vinegar,
ora cleaning product made specifically for
dishwashers.
• When not in Use for a LongTime
It is recommend that you run a wash cycle
with the dishwasher empty and then remove
the plugf rom the socket, turn off the water
supply and leave the door of the appliance
slightly open. This will help the door seals to
last longer and prevent odours from forming
within the appliance.
• Moving the Appliance
If the appliance must be moved, try to keep
it in the vertical position. If absolutely
necessary, it can be positioned on its back.
• Seals
One of the factors that cause odours to
form in the dishwasher is food that remains
trapped in the seals. Periodic cleaning with
adamp sponge will prevent this from
occurring.