eta 339390001, Инструкция по эксплуатации

Страница: 101 / 148

EN - 101
EN
GROUNDING INSTRUCTIONS
• This appliance must be earthed. In the event of a malfunction or breakdown,
earthing will reduce the risk of electric shock by providing a path of least
resistance for the electric current. This appliance is equipped with a cord having
an equipment-earthing conductor and an earthing plug. The plug must be plugged
into an appropriate outlet that is installed and earthed in accordance with all local
standards and requirements.
WARNING
• Improper connection of the equipment earthing conductor can result in the risk
of an electric shock.
• Check with a qualified electrician or service representative if you are in doubt whether
the appliance is properly earthed.
• Do not modify the plug provided with the appliance. If the plug does not fit properly
to the outlet, please have a qualified electrician to install a proper outlet.
WATER CONNECTION
How to connect a safety AQUAstop hose:
The appliance must be connected to the water supply with new hoses. Old set of hoses should
not be used repeatedly! The water pressure must be between 0.04 MPa and 1 MPa.
1. Pull out the AQUAstop safety hose from the transport location on rear wall of the dishwasher.
2. Screw the AQUAstop hose to the faucet (3/4 inch threaded)
3. Turn on the water supply before turning on the dishwasher.
What is a safety AQUAstop hose?
It is a hose that prevents water from spilling into the area around the dishwasher as it breaks.
The safety AQUAstop hose has double walls. The system works by blocking the water supply
to the AQUAstop hose at the very beginning - behind the inlet faucet when the inner hose is
damaged and the space between the inlet hose and the outer hose is being filled by water.
Cold Water Connection
If the water pipes are new or have not been used for an extended period of time, let the water
run to make sure that the water is clear. This precaution is needed to avoid the riskofthe
waterinlet to be blocked and damage the appliance.
WARNING
Please close the hydrant after using.