eta 11120L, Руководство по установке

Страница: 9 / 48

Technical data
9
The flue gas connection on the boiler does not yet give any indication of the required chimney diameter.
Information on the required chimney diameter can be found in the installation instructions for the boiler in the
Chimney chapter.
Subject to technical changes and errors
TWIN pellet burner Unit 40 50
Rated capacity TWIN pellet burner kW 12 - 40 14.3 - 49.9
Efficiency of pellet burner at partial / full load % 90.4 / 91.7 90.6 / 90.7
Transport dimensions of the pellet burner without panel W x D x H mm 810 x 591 x 1249
Weight with/without pellet burner kg 990 / 800
Pellet bin on boiler (net) kg 60 kg (294 kWh)
Maximum distance to pellet store m 20
Ash box volume litres 25
Flue gas mass flow rate of pellet burner at partial / full load g/s 9 / 26 11 / 32
CO
2
content in dry flue gas at partial / full load % 10 / 12 10 / 12.8
Exhaust temperature of pellet burner at partial / full load °C ~110 / ~170
Required flue draught Pa
> 5 Pa
a draught limiter is required above
30 Pa
Carbon monoxide (CO) emissions of pellet burner at partial / full
load
mg/MJ 12 / 2 13 / 2
mg/m³
(13% O
2
)
18 / 3 21 / 3
Dust emissions of pellet burner at partial / full load
mg/MJ 8 / 6 9 / 6
mg/m³
(13% O
2
)
13 / 10 14 / 9
Unburned hydrocarbon emissions (CxHy) of pellet burner at par-
tial / full load
mg/MJ 1 / < 1 1 / < 1
mg/m³
(13% O
2
)
1 / 1 1 / 1
Electrical power consumption of pellet burner at partial / full load W 65.8 / 116 67 / 116
Electrical power consumption of pellet burner in ready mode W 11.6
Maximum permissible operating pressure bar 3
Temperature adjustment range °C 70 – 85
Maximum permissible operating temperature °C 95
Minimum return temperature °C 55
Boiler class 5 acc. to EN 303-5:2012
Tested fuels Pellets ISO 17225-2-A1, ENplus-A1
Electrical connection 1 x 230 V / 50 Hz / 13 A
Mode of operation non-condensing