62
12 • DUO DALI plus PROGRAMMING
LEVEL 1
PROGRAMMING
LEVEL 2
DALI
Setting options for connected DALI electronic ballasts.
LEVEL 3
Electronic ballast
LEVEL 4
Power on level
Once the device has been connected to the power supply,
it operates at a preset output value
(0-100%) unless the value of the DALI presence detector
is changed.
System failure level
In the event of a failure affecting the DALI bus voltage, the
electronic ballast adjusts the preset light value (0 - 100 ).
Max. level
Maximum output (from 0 to 100%)
Min. level
Minimum output (from 0 to 100%)
Fade time
Fade time of the current light value to a value specified by
the "direct light power level" DALI command.
LEVEL 1
PROGRAMMING
LEVEL 2
DALI
Setting options for connected DALI electronic ballasts.
LEVEL 3
Electronic ballast
LEVEL 4
Fade rate
Fade rate for DALI commands "DIM UP" and
"DIM DOWN" (increments per sec.)
Dim linear
Switch the DIM curve to linear behaviour
(LED ballasts only).
Dim logarithmic
Switch the DIM curve to logarithmic behaviour.
Fast fade time
Set the fast fade time (fade time = 0) between 0
and 675 ms (LED ballasts only).
This command can only be used in conjunction
with DALI ballasts.
Reset
Reset the DALI operating devices to their factory settings.
GB
