58
GB
LEVEL 1
PROGRAMMING
LEVEL 2
Light values
All dim values and offset adjustments are made in the
light values.
LEVEL 3
Light set value
Light set value in lux at which the detector controls the
lighting. 100 - 1,000 lux.
WARNING:
Measured value
depends on measurement environment (reflection coefficient).
Daylight control
Detector controls lighting at 100% luminous efficiency
when presence is detected.
Current luminous efficiency
Percentage of luminous efficiency of channel 1/2 between
0 and 100% for setting the light value to the target value.
Save current value
Save the currently measured light value as the light set
value.
Offset channel 2
Here you can set the offset between channels 1 and
2. Channel 2 always follows channel 1 (0 - 90%).
LEVEL 1
PROGRAMMING
LEVEL 2
Light values
All dim values and offset adjustments are made in the
light values.
LEVEL 3
Orientation light
The orientation light is the light value that the detector
switches to if the switch-off delay time has elapsed and the
measured light value is below the threshold value. Can be
adjusted in 10% increments (between 10 and 50%).
12 • DUO DALI plus PROGRAMMING
