61
GB
LEVEL 1
PROGRAMMING
LEVEL 2
Operating options
Other functions can be called up here.
LEVEL 3
100 h burn-in on
With this function, the detector leaves channels 1 and 2
on for 100 hours to "burn in" the illuminant.
100 h burn-in off
You can switch off the "100 h burn-in function" here.
Corridor on
If "corridor on" is selected, channels 1 and 2 cannot be
switched off using the button.
Corridor off
If "corridor off" is selected, channels 1 and 2 can be
switched off using the button.
LEVEL 1
PROGRAMMING
LEVEL 2
Operating options
Other functions can be called up here.
LEVEL 3
LEDs on
Enable presence detection confirmation via an in-built LED
on the detector.
LEDs off
Disable presence detection confirmation via an in-built LED
on the detector.
Orientation light on
Once the switch-off delay time has expired and after the
switch-off warning (if enabled > 0 min.), the detector will
switch channels 1 and 2 to the preset orientation light
value as opposed to completely off.
Orientation light off
Once the switch-off delay time has expired and after the
switch-off warning (if enabled > 0 min.), the detector will
not switch channels 1 and 2 to orientation light mode but
will switch them off completely.
Sensitivity
You can reduce the detector's level of sensitivity here
(0 = normal; 1 = reduced; 2 = significantly reduced).
12 • DUO DALI plus PROGRAMMING
