Esu SwitchPilot 3 Plus, Инструкция по эксплуатации

Страница: 5 / 36

5
Features
4. Features
ESU SwitchPilot 3 decoders are optimized for stationary use on
your model train layout and can switch conventional solenoid
turnout drives, daylight signals, magnetic uncouplers, incande-
scent lamps (bulbs) or other stationary electric loads.
4.1. General Features
The SwitchPilot 3 Plus has 16 transistor outputs for switching up
to 8 solenoid accessories (e.g.: turnouts) or 16 other electric loads
such as uncoupling tracks or incandescent lamps. Each output can
be individually programmed for the purpose of use and is electro-
nically protected against overload and short circuit.
The SwitchPilot 3 Plus can receive its power directly from the digi-
tal system or an external DC or AC power supply.
SwitchPilot 3 Plus supports multi-protocol operation and can be
used with central units supporting the Märklin® Motorola® sys-
tem (e.g.: 6021, Central Station® or Mobile Station®) as well as
DCC enabled command stations. Configuration can be carried out
on the main (POM – Programming on the Main) and the program-
ming track. Thanks to RailCom®, CVs can also be read out.
Operation with the Roco® Lokmaus 2 is not possible: The Lok-
maus 2 sends only DCC locomotive commands instead of the re-
quired accessory commands.
For simplifying the rather cumbersome configuration of accesso-
ry decoders, the SwitchPilot 3 Plus has an innovative operating
concept consisting of a 4-line, illuminated OLED display and three
input buttons. All settings can be checked directly on the decoder
at any time with the help of the display and changed, if so desired.
„Programming” with the help of your command station is not
required. It cannot get any easier.
4.2. Technical Data
SwitchPilot 3 Plus
Input voltage 12V - 20V DC power supply
12V - 16V AC power supply
Digital track voltage
Outputs 16 Transistor outputs
Maximum load 1.5A each (2.5A for
100msec) arranged in 8 groups as a pair
Short-circuit and overload-protected
Output power Complete module 2A (2,5A for 100mS)
Feedback inputs Unavailable
Operating modes
DCC „Accessory Decoder“ with Rail-
Com® (addressing according to RCN-213
oder ROCO®). Turnout numbers 1 - 2048.
Märklin® Motorola®. Turnout numbers
1 – 256. K83 and K84 operating modes.
Configuration
0.91“ OLED display with 3 buttons
Dimensions
86mm x 86mm x 25mm
4.3. Scope of delivery
The SwitchPilot 3 Plus is supplied with 5 detachable terminal
blocks (1x 4-pole for the track connection, 4x 5-pole for the out-
puts) as well as this operating manual. Under part number 51800.
SP.01 a pack of replacement terminal blocks is available from ESU.