7
Programming
For this initial work, the CVs have been set correctly.
CV 49
18
SUSI and load control «on»
CV 114
30
F3 output as clock output
By using the SUSI CVs you can program various properties to the
smoke generator.
6.2. provides more information.
6. Programming the smoke generator
The smoke generator has several options within the settings that
allow you to adapt the function of the model. Depending on what
decoder you use each will likely have different settings.
6.1. For ESU LokSound XL Decoder
You can configure the large smoke generator to your preference.
It is, however, imperative to have a LokProgrammer 53451/53452
because you need to change settings in the sound sequencing.
You must first change the desired sound project, load it into the
LokProgrammer and then specifically change settings. Sound and
smoke control work so closely together, that if you do not make
these changes in settings no result will be possible. An example of
this is shown of the file 56529 (BR 50) file. This file has all the re-
quired settings. It is a good example of what will need to be done
to other files to make the Smoke Units work properly.
6.1.1. Basic settings
First, the AUX1 output must be set so that it provides data for the
smoke generator instead of a normal function output.
Settings AUX1
Figure 8:
Connecting an Massoth eMotion XLS
Figure 7:
