Estyma IGNEO Touch, Руководство пользователя

Страница: 5 / 16

Chapter 1. General information
 After turning off the device using touch panel, it can still be under power.
 This regulator is designed as a part of a boiler, not a standalone device.
 This device requires a proper ventilation. Do not cover any ventilation holes to assure a proper air circulation.
 For inside use only, unless stated otherwise.
 Do not expose to impacts or vibrations.
 Before installing verify if electrical grid parameters are within specifications.
 To ensure electric shock protection, verify that the device is grounded. It must be connected with a 3 pin
socket. The power socket must be installed by an authorized electrician.
 Verify if the device will not cause power grid overload. Do not connect the device to a circuit containing
electric motors and other impulse disruption sources (freezers, washing machines etc.)
 Before connecting any wires or external devices, turn off mains supply.
 To completely turn off the device, pull the plug out of the socket. Especially if it will not be used for an
extended ammount of time.
 The power cord must be protected from damage. It must not be stepped on and no objects should be
placed on it.
 The regulator must be installed by the boiler producer. Any electrical connections must comply with
circuit diagrams and local standards and regulations.

Additional safety devices must be used to protect the boiler and heating elements from eventual regulator
malfunctions or software errors.

This device has no replaceable parts. All servicing and repair, apart from cleaning and circuit breaker replacement
(electrical grid disconnected) and changing settings must be performed by an authorized profesionals.
 Before any service activity disconnect the device from any power sources.
 Do not use gasoline, solvents or other chemicals for cleaning. It can damage the panel. Use soft cloth instead.
 If the power cord is damaged, do not use the device. Damaged cable must be replaced with one with the
same parameters by the service department.
 Settings must be adjusted to a type of boiler and fuel, accomodating for all other conditions. Incorrect
settings can result in failure. In extreme cases it can lead to life threatenig situations.

The regulator is ment to be installed by a boiler producer. Before using it in a device, the producer must
verify that it's compatible with the boiler type, and its use will not cause any danger or malfunctions.
1.3 D
ISPOSAL OF
W
ASTE OF
E
LECTRICAL AND
E
LECTRONIC
E
QUIPMENT
This electronic device consists of partly recycleable materials. It has to be disposed of by taking it to a designated used
electric and electronic equipment collection point or a retailer. It should not be mixed with general household waste.
www.estyma.pl 5
EGP-EN 20171024