Estun ERSA-4C, Руководство по обслуживанию

Страница: 36 / 56

INPUT / OUTPUT UNIT
22
Parameters Description
Power Supply Mode TBUS ( No external wiring is required.)
TBUS Consumption Current
≤100mA
Networking Mode Set module address by dial switch
Size (W×H×D) 112mm×113mm×22.5mm
Weight About 200g
Working Temperature 0
℃
~40
℃
Storage Temperature
﹣
10
℃
~55
℃
Relative Humidity
50
％
~95
％
, no condensation
Relative humidity not less than 95
％
at 0
℃
Relative humidity not less than 50
％
at 40
℃
Guide Rail Installation 35mm standard U type rail, horizontally installed.
Anti-shock and vibration performance Consistent with EN 60068-2-6/EN 60068-2-27/29
Anti electro-magnetic interference/radiation
performance
Consistent with EN 61000-6-2/EN 61000-6-4
Protection Level IP20
Certification CE
Hot Swap
DI signal support hot-swapping.
TBUS does not support hot-swapping.
6.4. Mounting and Networking of I/O Sub-station
6.4.1. Mounting Method
Be sure that the extensive module is powered off before installing, dismantling and connecting.
CAUTION
！
Be careful about electric shock and equipment damage!
6.4.2. Mounting
Fix couplers and extensive modules on the standard T-BUS terminals.