CHAPTER 2
STARTING OUT
Revised: 23 Aug 11
2-3
EST P/N AA107A
MODEL 195Ea HARDWARE CONFIGURATION
The following steps should be completed to begin configuration of the ESTeem Model 195Ea:
1.
Connect the antenna to the antenna connector on the ESTeem Model 195Ea (Figure 3). For a single antenna use Antenna Port
A and connect both if using dual antennas.
2.
Assemble the 195Ea hardware
as shown in Figure 4.
Figure 3: Antenna Configuration Diagram
Technical Tips
:
1. Configure the Model
195Ea prior to mounting.
2. Attach antenna to the
Model 195Ea before
powering up.
3. There is no On/Off
switch on the 195Ea.
Figure 4: Hardware Configuration Diagram
AA175.2
Power Supply