REPLACE THE LED LIGHT BAR (FOR SP18)
Figure a
Figure c
Unscrew this
screw to loose the
LED light bar
3 screw
Figure b
3 screw
6 screw
E-7
This electric fireplace uses one LED light
bar for convenience, if a LED light bulb
burnt out, it is a good idea to replace
the whole LED bar at the same time.
1). Turn the POWER switch off, and
then unplug the power cord from the
wall outlet.
2). If fireplace has been operating, Let
the unit cool at least 2 hours.
3). Unscrew the 6 screw then remove
the back plate (figure a and b)
4). Unscrew the LED light bar from the
bracket, and replace the new LED light
bar in location, DO NOT OVERTIGHTEN
THE SCREWS ( figure c ).
5). Follow steps 3 and 4 in reverse order
to reinstall LED light bar and back plate.
NOTE: We supply new LED light bar for this unit. New LED light bar can be
purchased at our customer service centre, please refer to the customer
service information.
WARNING: Do not use other LED source. Use of other LED source
may cause the shock of fire, causing property damage or person
-
al injury.
