E-3
This appliance, when installed,
must be electrically grounded
in accordance with local codes
or, in the absence of local codes,
with the current CSA C22.1
Canadian Electrical Code or for
U.S.A. installations, follow local
codes and the National Electrical
Code, ANSI/NFPA NO.70.
13.
Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire,
or damage the appliance.
14.
To prevent a possible fire, do
not block air intakes or exhaust
in any manner. Do not use on
soft surfaces, like a bed, where
opening may become blocked.
15.
The heaters must not be
located immediately below
a socket-outlet.
16.
This appliance has hot and arcing
or sparking parts inside. Do not
use it in areas where gasoline.
paint or flammable vapors or
liquids are used or stored. This
fireplace should not be used as a
drying rack for clothing. Christmas
stockings or decorations should
not be hung in the area of it.
17.
Use this appliance only as
described in the manual. Any
18.
other use not recommended by
the manufacturer may cause fire,
electric shock or injury to persons.
Always plug heaters directly into
a wall outlet / receptacle. Never
use with an extension cord or
reloadable power tap
(outlet / power strip).
19.
This heater has include a VISUAL
alarm to warn that parts of the
heater are getting excessively hot.
If the alarm flashes, immediately
turn the heater off,
unplug the
unit and inspect for any
objects on or
adjacent to the heater that may
have blocked the airflow or otherwise
cause high temperatures.
DO NOT OPERATE THE HEATER
WITH THE ALARM FLASHING.
20.
Connect to properly grounded
outlets only.
12.
