Pagina
82
PROGRAMMINGS
FAX
There are two different possibilities for FAX management:
-
activate the FAX-switch service, which recognizes FAX call and redirects
them to the FAX extension;
-
reserve a specific external line for FAXes, without activating FAX-switch
service.
In Home/Office and Office configurations the FAX-switch service is active,
while in Office with dedicated FAX line and Office with dedicated FAX and
GSM line one line is reserved for FAX receiving.
The following paragraph describes the programmings needed for both the
possibilities of FAX management.
Analogue line devoted to receiving all kinds of calls, using FAX recognition
-
Define FAX extension (see “Dedicated FAX line
-
Set the FAX extension with incoming calls with ringer (mode 2) (see
“Programm”).
-
Disable calls from dedicated FAX line for all other extension.
-
extension”).
-
Enable FAX recognition (see “Note:
to avoid the selection of “0”
(line engagement digit) from FAX extension, see “Automatic
Engagement” service in paragraph “Enable Services”
-
recognition”).
-
Disable FAX extension to ring upon incoming calls over the various lines
(see “Programming incoming calls”, enter the call pick up option).
Note: in the event a doorphone board is provided, predispose the
FAX extension with doorphone ringer disabled (see
“Doorphone calls”, enter access type 0 or 1).
Note: to avoid the selection of “0” (line engagement digit) from
FAX extension, see “Automatic Engagement” service in
paragraph “Enable Services”.
Dedicated FAX line
-
Set the FAX extension with incoming calls with ringer (mode 2) (see
“Programm”).
-
Disable calls from dedicated FAX line for all other extension.
