PROGRAMMINGS
Pagina
107
Deleting a provider code
Allows you to delete the telephone provider code assigned to a service class.
(service class) (confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 21710.
Dial the number of the service class (from 01 to 08).
Wait for the confirmation tone and hang up.
A
CTUATOR RELAY CONFIGURATION
Hi-Pro is provided with 2 actuator relays.
Note: in presence of a traditional doorphone board, relays can also
be activated through the door opening function, if the impulse
functioning is not enabled).
This programming allows configuring each actuator relay:
1
Local access
with password
Determines whether the extensions should enter a
password to use the relays.
2
Deactivation
Determines whether it is possible to deactivate the
relay (open contact).
3
Activation
Determines whether it is possible to activate the
relay (close contact).
4
Impulse
Determines whether it is possible to activate the
relay for a fixed programmed amount of time (the
closure time of the contact can be set only via
remote programmer software).
5
Time-set
Determines whether it is possible to activate the
relay for the amount of time specified when
requiring the service.
6
Relay condition
at start-up
Determines the relay status at the start-up of Hi-Pro:
activated, deactivated or automatic (that is, the relay
will assume the status at the previous switch-off).
