Pagina
22
HI-PRO 280
Doorphone connection
Cit 1: Speech input
Cit 2: Speech output
Cit 3: Common
Cit 4: Ringer 1
Cit 5: Ringer 2
Connect the doorphone station to the corresponding contacts in
the terminal.
Connect the door openers to relays terminals (Relay 1 and Relay 2
terminals).
Connect the mains.
Power on doorphone station.
Check audio levels, if necessary use trimmers on the doorphone or ISDN
board.
Reassemble the main part of the lid and tighten the screw.
Replace the right side of the lid .
Actuator Relays
Hi-Pro has 2 relay which can command loads with up to 10A to 24V
absorption. For Relays configuration use teleprogramming software or
programming codes at page 108.
Note: if the doorphone or ISDN optional board is inserted, relays 1
and 2 are automatically assume the function of a door opener
(door 1 and door 2 respectively), but they may also be used as
actuators dialling the related code.
