Esprit Statmux User Manual
December 1997 Issue 1.3 Page 10 of 36
2.8
Composite Configuration
PARAMETER
CHOICES
NOTES
Carrier
V.24, V.11
If the screen shows either
Toggle through software
V.24 or V.11 then you may
Internal link fitted to J5
toggle between the two
using the space bar.
To select V.35 , the link
fitted to J5 must be moved
to J6
V.35
Internal link fitted to J6
Link Clock
Ext
Normal setting.
INT [Rate]
Internal clock rates of up to
256K may be set for test
purposes.(64K for 8
channel unit)
2.9
STATMUX channel Configuration
To change the Statmux channel configuration, select the configuration screen (shown
on page 7) by moving the cursor to the top line on the right hand area of the screen,
next to 'Channels 1-16:' (Channels 1-8) and pressing ENTER or RETURN.
The display shows parameters for eight data channels CH1 to CH8, or CH9 to CH16.
The alternative 8 channels are selected by moving the cursor further to the left or right
as necessary.
Each data channel has parameters selectable as detailed on the following page.
2.10
Copying another channel's set-up
Channel data may be copied from another similar STATMUX channel, by placing the
cursor over the channel number field (of the channel to be changed).
The message 'Enter number or use <+>/<-> to copy channel' appears.
Simply entering the number (if channel is less than 10) of the channel to be copied
transfers all of that channels parameters to the current channel. If the channel number
is greater than 10, the spacebar may be used to increment it through each channel
number.
