
8
Contents
Safety precautions...................................................... 8
1. General information................................................ 8
2. Handling.................................................................8
3. Installation .............................................................8
3.1. Discharge pipe assembly................................. 9
3.2. Electrical connection........................................9
3.3. Pre-start checks...............................................9
4. Starting.................................................................. 9
5. Maintenance...........................................................9
6. Nameplate............................................................ 10
7. Possible faults, causes and solutions.....................10
8. Technical data....................................................... 10
9. List of main components........................................23
10. Illustrations ....................................................... 24
Safety precautions
This symbol
indicates the risk level
deriving from failure to observe the prescribed safety
precautions:
Warns that failure to observe the pre
cautions involves a risk of electric
shock.
Warns that failure to observe the pre
cautions involves a risk of damage to
persons and/or things.
Warns that failure to observe the pre
cautions involves the risk of damaging
the pump and/or the facility.
DANGER
Risk of
electric
DANGER
WARNING
1. GENERAL INFORMATION
Please observe the following instructions to achieve the
best pump performance possible and a trouble free
installation.
Read these instructions before installing the
pump.
Save them for future reference.
These pumps have been designed for the drainage of
infiltration water, empty water tanks or swimmingpools,
with clear or slightly dirty water (Max. particle diameter
in suspension = 5mm.). The maximum water
temperature is 35° C.
All pumps have been manufactured in top quality
material, submitted to strict hydraulic and electric
controls.
Correct pump operation is assured providing
the instructions on electrical connection,
installation and use are strictly adhered to.
Failure to adhere to the instructions can result
in premature failure of the pump and voiding
of the warranty.
2. HANDLING
The pumps are supplied suitably packaged to prevent
damage in transit. Before unpacking, check that the
packaging has not been damaged or deformed.
Lift and handle the product with care and with
the right tools.
3. INSTALLATION
Pumps should not rest on the bottom of the
well, nor be placed very near the walls. To
avoid this, hang the pump from a cable
through the handle on the top.
Never hang the pump from the power cable or
the discharge line. The pump must be
completely submerged to ensure proper
cooling. See fig. 2.
A
Warning! Observe limitations of use.
B
The name plate voltage must be the same as the mains voltage.
C
Connect the pump to the mains via an omnipolar switch with at
least a 3 mm opening between contacts.
D
Install a high-sensitivity differential switch (0.03A) as extra
protection against lethal electric shocks.
E
Connect the pump to the ground.
F
Use pump only within performance limits indicated on the name
plate.
G
Be careful with hazardous liquids and environments.
H
Do not carry the pump by the power cable.
I
This apparatus may be used by children older than 8 and persons
with reduced physical, sensory or mental capacities, or lacking
experience and knowledge, if they are supervised or receive
adequate training on the safe use of the apparatus and understand
the dangers.
Children should not be allowed to play with the apparatus.
Children should not perform the ordinary cleaning and maintenance
tasks without supervision.
J
The pump should only be dismantled by authorized personnel.
K
Cut the power supply before servicing the electrical pump.
L
Warning! Avoid icing.
Damage prevention and safety instructions
(see figure 5)
INSTRUCTION MANUAL (TRANSLATION FROM THE ORIGINAL SPANISH)
EN
Содержание VIGILA 100M
