Espa SPEEDRIVE, Инструкция по эксплуатации

Страница: 9 / 24

- 9 -
If necessary, reconnect the display cable to the motherboard.
Give special attention to positioning.
Single
Single Single
Single----Phase Version
Phase Version Phase Version
Phase Version Three
Three Three
Three----Phase Version
Phase Version Phase Version
Phase Version
4) OPERATING MODES. 4) OPERATING MODES. 4) OPERATING MODES. 4) OPERATING MODES.
Automatic mode. Automatic mode. Automatic mode. Automatic mode.
This is the common operating mode.
The inverter controls the motor's rotation speed to maintain a constant pressure in the installation (set pressure).
Manual mode.
Manual mode. Manual mode. Manual mode.
Allows the pump start-up or stop manually at an adjustable frequency.
5) SETUP. 5) SETUP. 5) SETUP. 5) SETUP.
Espa ESD pumps and Espa pressure booster sets are pre Espa ESD pumps and Espa pressure booster sets are pre Espa ESD pumps and Espa pressure booster sets are pre Espa ESD pumps and Espa pressure booster sets are pre----configured in origin with an optimum pressure set configured in origin with an optimum pressure set configured in origin with an optimum pressure set configured in origin with an optimum pressure set
point for equipped pumps. point for equipped pumps. point for equipped pumps. point for equipped pumps. Do not need any further adjustment. Do not need any further adjustment. Do not need any further adjustment. Do not need any further adjustment.
Speedrive module purchased separately, is necessary its configuration, according to the following paragraphs.
5.1) Definitions. 5.1) Definitions. 5.1) Definitions. 5.1) Definitions.
Set pressure: Set pressure: Set pressure: Set pressure: is the pressure that the unit will maintain in the installation.
Differentia
Differentia Differentia
Differential pressure:
l pressure: l pressure:
l pressure: is the differential pressure required for the unit to activate again.
Stop frequency: Stop frequency: Stop frequency: Stop frequency: frequency at which the inverter stops the pump.
Stop delay:
Stop delay: Stop delay:
Stop delay: timer used by the unit before it stops.
Auxiliary
Auxiliary Auxiliary Auxiliary “on “on “on “on----off” pump: off” pump: off” pump: off” pump: auxiliary pump that is not equipped with Speedrive.
Auxiliary
Auxiliary Auxiliary
Auxiliary regulated pump:
regulated pump: regulated pump:
regulated pump: auxiliary pump that is equipped with a Speedrive.
5.2) Browsing. 5.2) Browsing. 5.2) Browsing. 5.2) Browsing.
Screen displaying
the menus
Browsing keys
Flashing = pump waiting
Fixed = pump operating
Failure
See description on screen
Power supply plug-in
Browsing the menus.
Variation of the flashing parameter.
Browsing a submenu.