Espa SPEEDRIVE, Инструкция по эксплуатации

Страница: 14 / 24

- 14 -
DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE
Difference between the set and start-up pressure.
For ex. : 3 bars set – 0.5 bars differential = 2.5 bars start-up
MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT
Maximum configured current/ Present current
STOP FREQUENCY
STOP FREQUENCY STOP FREQUENCY
STOP FREQUENCY
Stop frequency of the inverter / Present output frequency
STOP DELAY STOP DELAY STOP DELAY STOP DELAY
Timing before a stop.
MODULE TEMPERATURE MODULE TEMPERATURE MODULE TEMPERATURE MODULE TEMPERATURE
Current temperature of the module or circuit.
DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG
DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS
Press OK
OK OK
OK to confirm.
To display the log, press
◄
(Hist)
To display the parameters, press
►
(Param)
From any screen, tap OK to return to the main screen 2.1
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
From any screen, tap OK to return to the main screen 2.1
OVERCURRENT OVERCURRENT OVERCURRENT OVERCURRENT
Number of times an overcurrent is detected.
(see Section 6)
SHORT
SHORT SHORT
SHORT----CIRCUIT
CIRCUIT CIRCUIT
CIRCUIT
Number of times a fault caused by a short-circuit is detected.
(see Section 6)
VOLTAGE VOLTAGE VOLTAGE VOLTAGE
Number of times the inverter has stopped due to a voltage fault.
(see Section 6)
MODULE TEMPERATURE MODULE TEMPERATURE MODULE TEMPERATURE MODULE TEMPERATURE
Number of times the inverter has stopped due to excess temperature in the
module.
(see Section 6)
LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK
Number of times the inverter has stopped by activating the probe level.
(see Section 6)
DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG
DISPLAY LOG DISPLAY LOG DISPLAY LOG DISPLAY LOG
Press Ok to confirm.
To display the alarms, press
►
(Alarm)