14
Owners Handbook
Loosen the brake wire locking screw
Turn adjusting screw so that the wheel turns freely when the brake lever is not held
Tighten the brake wire locking screw
Ensure that the brake is fully applied when pulling the brake lever at least 20mm
before it touches the handlebar. If not, re-adjust brake.
Loose the nut of back shaft
Loosen the chain-adjusting screw
Adjust the tightness of the chain to allow 10-15mm of play Carefully ensure the back
wheel is straight in the frame.
Tighten the chain-adusting screw and back shaft to at least 30Nm
Adjustment of Parts
ADJUSTMENT OF BRAKES
ADJUSTMENT OF CHAIN TIGHTNESS