Eskabe DVEL 12, Руководство владельца по эксплуатации и установке

Страница: 4 / 25

4
PRODUCT FEATURES (CONTINUED)
NOTICE
A qualified service person must install the heater. Follow all local codes.
CHECK GAS TYPE
Use only the type of gas indicated on the rating plate.
INSTALLATION
INSTALLATION ITEMS
Before installing heater, make sure you have the items listed below.
n
Piping (check local codes)
n
Sealant (resistant to propane gas)
n
Manual shutoff valve
n
Ground joint union
n
Test gauge connection
n
Sediment trap
n
Tee joint
n
Pipe wrench
The installation location shall provide the following;
a) adequate combustion and ventilation air, and
b) adequate accessibility clearances for servicing.
MINIMUM CLEARANCE FROM COMBUSTIBLE CONSTRUCTION
Rear............................... 0 Inches/0mm (to bracket)
Sides.............................. 6 Inches/152mm
Top................................. 36 Inches/914mm
Floor............................... 6 Inches/152mm (to top of carpeting, tile, etc.)
Figure 4
NOTICE : Maintain the minimum clearances shown in figure 4. If you can, provide greater clearances from
floor, ceiling and adjoining wall.