Eskabe DVEL 12, Руководство владельца по эксплуатации и установке

Страница: 15 / 25

14
OPERATION (CONTINUED)
CAUTION
Do not try to adjust heating levels by using the manual shutoff valve.
IMPORTANT
•
Do not dry clothes over the heater.
•
Do not spray any aerosol near the heater when functioning. Do not store these elements near the appliance.
•
Do not touch grill to avoid burns.
•
Avoid blocking air inlet and hot air outlet.
•
Do not spill water over the heater as it may cause corrosion or damage.
•
Do not touch vent cap while heater is operating, to avoid burns.
•
If you smell gas, shut off control valve, open doors and windows and do not light any electrical fixture near the
heater. Call your Gas Supplier.
NOTE:
It is normal for the new wall furnace to give some odor the first time it is burned. This is due to the curing of the
paint and any undetected oil from the manufacturing process.
It is recommended to burn a new wall furnace for at least two (2) hours the first time that it is used.
CLEANING AND MAINTENANCE
WARNING
Turn off heater and let cool before cleaning.
CAUTION
You must keep control areas and circulating air passageways of heater clean. Inspect these areas of heater before
each use. Have heater inspected yearly by a qualified service person. Heater may need more frequent cleaning due to
excessive lint from carpeting, bedding material, etc.
Verify proper operation after servicing.
S’assurer que l’appareil fonctionne adéquatement une fois l’entretien terminé.
CABINET
Exterior
Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabinet to remove dust.
Air Passageways
Use a vacuum cleaner or pressurized air to clean.
Vent Cap
Use a vacuum cleaner or pressurized air to clean.
Pilot and Burner
Periodically visually check the pilot and burner flames.
(View flames through view port)
Fig. 22