ESI RF BRIDGE
User Guide
version 1.0.4.0
www.elec-solutions.com
© 2014 Electronic Solutions, Inc.
Page 14 of 19
* 00 means at reference (for RQ, default = open), 99 means at limit away from reference (closed). The percentages can be flipped when
using the “Flip position” option in the Configuration Menu of the ESI RF Bridge.
NOTE: positions may not be evenly spaced depending on method of lift and motor response to load.
NOTE: 2 digit positions repeat the 1st digit as the 3rd digit to evenly space the fractional part. For example: 27% is converted to
27.2%. When a position is reported as 2 digits, the 3rd digit is ignored (not rounded).
** For ESI RF RQ Transceivers —
product label
= v1.5.0 and earlier /
firmware
= v1.5.0.1 and earlier — the motor will jog once when a
scene is cleared.
For ESI RF motors —
product label
= v1.4.0 and earlier /
firmware
= v1.4.0.6 and earlier — the motor does
not
jog and the scene is
not
cleared.
s
Scene number is one of 62 possible: from 0 to 9, A to Z, a to z
Appendix D
— Unsupported RQ Commands
These RQ commands are not supported when sent to an ESI RF Bridge from a PC or automation system.
BSB
= the default RQ address of the ESI RF Bridge.
!BSBU;
the “U” = undefined or invalid message.
RQ
Command
Data
Description
Send
Response
Notes
~
Randomize the ESI RF
Bridge’s RQ address
!BSB~;
!BSBU;
Not allowed.
~
Randomize the RQ
address of all RQ devices
(Global “All)
!000~;
!BSBU;
Not allowed.
~
Randomize the RQ
address of one RQ device
!002~;
!BSBU;
Not allowed.
@
Global “All”
3 characters
(0-9 or A-Z)
Re-address all devices
!000@AAA
!BSBU;
Illegal command.
d
- (minus sign)
Clear all scenes on motor
!002d-;
!BSBU;
Currently not supported.
N
?
Request the ESI RF
Bridge’s default name
!BSBN?;
!BSBU;
Not allowed.
The name parameter is not
supported on the ESI RF Bridge
or on RF devices networked to
the ESI RF Bridge.
N
1-16
characters
Assign a name to the ESI
RF Bridge
!BSBNrf_bridge; !BSBU;
Not allowed.
Cannot assign a name to the
ESI RF Bridge.
R
?
Request 3 digit position
now
!002R?;
3 digit position
report if stopped.
Currently not supported.
